Cleaning & Maintenance FAQs

Replace or obtain support for a SafetyMat® when its condition no longer supports normal use; there is no universal lifespan for every product and setting. Warning signs can include lifted edges, bubbles, tears, damaged printing or texture, movement, changed traction, contamination that cannot be removed safely, blocked drainage, or deterioration of the surrounding surface. Inspect the area after cleaning and whenever conditions change. Do not wait for a calendar date if a visible problem appears earlier. If a condition may create a hazard, stop using the affected area until it is evaluated. Facilities should document inspection findings and the reason for replacement.

For the complete care sequence, see How to Clean and Inspect SafetyMat.

Do not treat bleach, steam, or pressure washing as routine cleaning methods for every SafetyMat®. Bleach can affect printing, texture, adhesive edges, or the surrounding finish, especially when strong or improperly diluted. Steam adds heat and moisture that may stress the product or adhesive. A pressure washer can force water at edges or damage the surface. Start with a mild, non-abrasive cleaner and soft cleaning tool that suit both the mat and surrounding floor. Use a stronger method only when the instructions for the exact product and installation expressly allow it. Commercial facilities should confirm compatibility before using powered equipment.

For the complete care sequence, see How to Clean and Inspect SafetyMat.

Inspect SafetyMat® routinely, during cleaning, and whenever the surface or footing seems different. The right frequency depends on traffic, water exposure, cleaning, and the people using the area; a busy facility may need more frequent documented checks than a household installation. Look for lifted edges, bubbles, tears, visible wear, trapped debris, buildup, movement, changed traction, blocked drainage, and changes in the surrounding floor. Address concerns promptly. If a condition may create a hazard, keep people away from the affected area until it is evaluated. Facilities should assign responsibility for inspection, documentation, corrective action, and replacement.

For the complete care sequence, see How to Clean and Inspect SafetyMat.